Clean Room Phones VoIP

Voip clean room phones KNZD-63A

Product name:a key call clean room telephone
Model No.:KNZD-63A
Anti-jamming, anti-noise,SIP technology, point-to-point call directly,Without PBX

Cleanroom phones are designed for pharmaceutical, cinemas, and more. Available in both integrated and wall-mounted designs, power from the telephone line requires no additional power. There is also a VoIP version.
Hands-free phone in a clean room for pharmaceutical and hospital customers
Cleanroom phones are analog phones that are part of the analog, digital or general VoIP communication system. But is especially designed for cleanroom applications
The standard unit receives power from the telephone line and does not require additional power and can be replaced directly with existing analog phones.

These devices comply with IP.6.5 standards for protection against water and dust.
Additional network card to open the door with a remote password
Clean room phones are designed for clean rooms and laboratories. Translucent cushion cover protects the machine from disinfectants, chemicals and contaminants. Keyboards and speakers are placed on a flat surface for easy cleaning. Anti-vibration film provides excellent sound effects
Analog Clean Phone hands-free operation is suitable for clean rooms, clinical environments or hygienic environments. The operation is very easy. You can call using two automatic dialing buttons, or general calls using the full keypad. The image you see will be printed on the back of the overlay to prevent particle flow and to ensure long life. Graphic overlays are designed to withstand exposure to scratches of many chemicals commonly used in aseptic environments. Cleaning phones have a built-in or wall-mounted design that can operate in standard mode or intelligent operating mode.

INTRODUCTION:

  A key intercom for clean room,with super slim body,delicate appearance,easy installation.It is especially designed for Pharmaceutical factory, hospital operating room, clean room and clean workshop. The intercom receiver occupy space less. No exposed surface, UV + PE line surface material inserted into the wall smoothly and completely.You can clean by water or wipe directly with no damage. This intercom is waterproof and dust-proof. Knzd-63A clean room telephone has strong anti-jamming capability, and achieve the European standards EN50121. It is anti-static and enclosed design, no industrial components exposing to air.Press CALL button to off-hook or end the call.Only need one network cable to connect with two pcs of intercom in clean room. Digital signal transmission, there is no outside interference.Sounds improve 15 DB than ordinary clean room telephone.

FUNCTION:

One key call:press CALL button,opposite side rings automatically, allow answer automatically.
Incoming call flashing notice:led indicator brightens when calls coming.
Talking time limited:It has 7 minutes to talk when the call is connected.Time to the end,telephone hang up automatically.The function of preventing the phone is busy are factor defaults.
Automatically hang up: if called ended,the caller would hang up automatically after detecting the busy signal.

Material:ABS

INSTALLATION 

SPECIFICATION - Analogue

1. PSTN analogue telephone                                          2. DTMF dialing                 

3. MTBF:100000hours                                                    4. MTTR: 2 hours                 

5. Connection: RJ11 screw terminal pair cable               6. Sound level of ringing:over 70dB(A). 

7. Call transmission index:(5KM)SLR<12,RLR<-1,stmr>10, output impedance is 600 Ohm.maximum distance: 7KM 

8. Applicable for various types of SPC exchange PABX and dispatching exchange system with feeding voltage of 33-60V. 

9. Connection: RJ11 screw terminal pair cable (or RJ11 Socket of plug upon request),with stainless steel cable protected 

10. Super strong function is available for dialing 12 groups of numbers stored in the memory,(maximum length of each number is 16 digits) 

11. Standard frequency:low frequency group:697. 770. 852. 941Hz,high frequency group:1209. 1336. 1477Hz, frequency deviation:-1.5% ~ +1.5% 

12. Ambient temperature:-30 ~ +60 degree. Relative humidity:10%~95% Atmospheric pressure: 86~106Kpa Circumstance noise:less than 60dB(A)

SPECIFICATION - VoIP

1. VoIP SIP2.0 telephone                                              2. DTMF dialing                                                     

3. MTBF100000hours                                                   4. MTTR: 2 hours 

5. Auxiliary Contacts:1 Aux Output, dry contact            6. Rated load:0.3 A at 125 VAC; 1 A at 30 VDC

7. Contact Ratings. Load: Resistive load                      8. Echo cancellation code:G.167/G.168

9. Rated carry current:1A                                             10. Max.switching current:1A

11. Max.switching voltage:125 VAC,60VDC                 12. Audio Codes:G.711, G.722, G.729

13. IP Protocols:IPv4, TCP, UDP, TFTP, RTP, RTCP, DHCP, SIP

14. Free dial (maximum length of each number is 16 digits)            

15. Communication: Full duplex 2-way hands-free communication

16. Call Control Signaling:VOIP SIP Info(DTMF), RFC 2833(DTMF)

17. Network:10/100 BaseTX Ethernet, RJ45 connectors, Cat5e or better 

18. Power:Power over Ethernet, IEEE802.3af, Class 0  Local power, 12VDc,Idle 2W, Max 10W

19. Programming:Non-volatile flash memory programming and configuration through Web GUI

20. Management and Operation:DHCP and static IP, remote automatic software upgrade, centralized monitoring, status LED  

21. LAN Protocols:Power over Ethernet(PoE,802.3af), WLAN(IEEE 802.3af), Network Access Control(IEEE 802.1x),STP(IEEE 802.1d), RSTP(IEEE 802.1d-2004)

Hospital intercom system

The hospital intercom system, based on ip voice communication, realizes emergency communication between the ward and the nurse station, using clean room telephones and one-touch speed dialing.

The detail about the  it ,you can view :https://www.koontech.com/ShowSolution91.html