We can provide you with different versions of elevator calls, including ip, analog or wireless. We can provide you with a complete, elevator system that allows you to perfectly monitor the elevator status of the entire building.
Elevator phones are designed to provide elevator users with safe and reliable elevator emergency communications. Our elevator telephones are IBC, ASME and ADA, UL and CSA certified.
Yes, we need it. When the passenger is in the elevator, if the emergency occurs, the elevator can not be operated up and down, and the door cannot be opened. In case of an emergency, an emergency elevator phone can help the driver to get the help in time.All elevator phone needs to meet ADA, ASME and IBC code requirements.
No, the elevator phone is simply used for emergency communication when the elevator is in an emergency. The user can only make a call to the duty room through the emergency call in the elevator car.
With the rapid development of the economy and the continuous increase and renewal of modern buildings, the number of elevators has reached an incalculable number. According to incomplete statistics, there are more than 1 million elevators in the United States, and each elevator is used 5 to 10 times a day. Elevator phones are particularly important at this high level of use. Although the elevators are now very advanced and scientific, there are still cases where the elevators get stuck. Staying in the stalled elevator for a long time, people inside will feel stuffy and stuffy, and lack of oxygen. Therefore, a reliable emergency elevator phone is essential to help you quickly find help.
Main Product features
1.High waterproof,dustpoof performance,SUS304 full stainless steel body,protection grade reaches to IP55.
2.High durability,oil,acid,alkali resistance,conform to the standards of GJB -773 and UL1332 requirements.
3.Without handset,communication via loudspeaker.
4.Highly integrated mainboard,using the most advanced industry-specific microcontroller made in ATMEL company.
5.The box with earthing device is completely isolated with internal electric circuit,and has certain electromagnetic shielding effect.
6.Conversation with clear loud voice,no feedback sreaming.
7.Support hotline of exchange system.
8.Support the function of exterior line antomatc lift.
9.Support conversation time limited.
10.Strong,thick and beautiful body with embed wall design.
11.talking distance:80cm-100cm.
Standard and SMART Analogue and VoIP-SIP options available
DTMF(Dual Tone Multi Frequency)
Matching with most PABX,PBX and PAX systems.
Main PCB
1.Well treated PCB used inside the phone.
2.Robust screw terminals used for the connection of ringer,handset,line in,hookswitch.
3.Selectable 7 minute time out,to release the line if the handset is left off hook.
4.All connectors be greased in production.
VOIP OVER IP-SIP(Version)
Connection type:Rj45 Socket inside sealed enclosure
Power supply:External 5V dc
Call set-up Protocol:Session Initiation Protocol(SIP)
Configuration:DHCP or STATIC IP address provisioning
Telephone installation
1.PSTN analogue telephone.
2.DTMF dialing.
3.MTBF: 100000 hours.
4.MTTR: 2 hours.
5.Connection: RJ11 screw terminal pair cable.
6.Applicable for various types of SPC exchange PABX and dispatching exchange system with feeding voltage of 33-60V.
7.Ambient temperature: -30 ~ +60 degree. Relative humidity: 10%~95%.
Atmospheric pressure: 86~106Kpa. Circumstance noise: less than 60dB(A).
8.Sound level of ringing: over 70dB(A).
9.Standard frequency:
low frequency group: 697. 770. 852. 941Hz,
high frequency group: 1209. 1336. 1477Hz,
frequency deviation: -1.5% ~ +1.5%.
10.Call transmission index: (5KM)SLR<12,RLR<-1,stmr>10, output impedance is 600 Ohm.
maximum distance: 7KM.
11.Hotline setting (maximum length of each number is 16 digits).
12.Connection: RJ11 screw terminal pair cable (or RJ11 Socket of plug upon request).
with stainless steel cable protected.
English
中文版
français
русский
Español
عربى